A stochastic realization algorithm via block LQ decomposition in Hilbert space

A stochastic realization problem of a stationary stochastic process is re-visited, and a new stochastically balanced realization algorithm is derived in a Hilbert space generated by second-order stationary processes. The present algorithm computes a stochastically balanced realization by means of the singular value decomposition of a weighted block Hankel matrix derived by a “block LQ decomposition”. Extension to a stochastic subspace identification method explains how the proposed abstract algorithm is implemented in system identification.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Effect of ibudilast on microcirculation thrombosis in rat inner ear

Arterial wall thickening may be quantitatively assessed by measuring the intima-media thickness (IMT) with high resolution ultrasound. Previous studies have shown a good inter/intraobserver variability of IMT measurements in the common carotid. In this study we evaluated the inter/intraobserver variability of IMT measurements in 10 randomly selected asymptomatic subjects (age 55.4 +/- 6). Two carotids and two femorals were studied in each subject. IMT for each patient was the average of five IMT measurements at the artery bifurcation. Three observers repeated the scanning and the measurements twice with no knowledge of the previous readings. The between observer coefficient of variation (CV) was 8.45%; the intraobserver CV (mean of carotids and femorals) varied from 4.4 to 5.1% for the three observers who measured IMT three times. The mean absolute difference between the first and the third measurement was 0.0738 mm. In conclusion IMT measurement variability is mostly due to differences between observers. The intraobserver variability is very small. IMT measurements at the carotid and femoral bifurcations have a low variability and are a good expression of atherosclerosis as they consider early lesions at the bifurcation level which may not be observed in the common carotid.     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

An early phase II trial combining cisplatin and carboplatin in advanced non-small cell lung cancer

We conducted an early phase II trial in advanced non-small cell lung cancer (NSCLC) to evaluate response efficacy of a combination of Cisplatin (CDDP) and Carboplatin (CBDCA). The twenty-six patients in the study had had no previous treatment. They received a sequential administration of 300 mg/m2 CBDCA and 80 mg/m2 CDDP with approximately 3,500 ml of hydration on day 1 every 4 weeks. All patients were evaluable for response and toxicity. Ten (38.5%) of all assessable patients achieved a partial response (95% confidence interval, 19.8-57.2%). Response rates for patients with stage III A, III B and IV- disease were 40.0 (2/5), 70.0 (7/10) and 9.1% (1/11), respectively. Response rates for patients with squamous cell carcinoma, adenocarcinoma and large cell carcinoma were 35.7 (5/14), 45.5 (5/11) and 0.0% (0/1), respectively. The median survival time (MST) of all patients was 11 months. The MST for patients with stage III disease was 14 months; for those with stage IV disease it was 7 months. The MST for responding patients was 15 months and for not responding patients 5 months. Major toxicities were hematologic and gastrointestinal, and the dose-limiting factor was thrombocytopenia. This combination chemotherapy was effective against NSCLC with tolerable toxicities. Further trials are warranted to determine the efficacy of the combination chemotherapy.     

Primary hepatic carcinoid tumor

A case of primary carcinoid tumor arising in the liver of a 69 year old woman with no endocrine symptoms is reported. Histopathologically, the tumor was diagnosed initially as a hepatocellular carcinoma in the biopsy specimen, and was shown subsequently to be a carcinoid tumor, demonstrating diffuse positive staining with Grimelius method. Mucin stained with periodic acid-Schiff (PAS), alcian-blue, and mucicarmine, and was shown partially in the glandular structures. Immunohistochemically, most of the tumor cells stained positively for chromogranin-A, epithelial membrane antigen (EMA) and neuron specific enolase (NSE). Ultrastructural examination revealed electron-dense core granules, measuring 40-120 nm in diameter in some of the tumor cells. Intensive and careful searches pre- and post-operatively revealed no other primary source of tumor other than the liver. The patient was reported well with no symptoms 3 1/2 years after the operation. This case is considered to be a primary hepatic carcinoid tumor. The recent literature is reviewed, and the possible histogenesis of hepatic carcinoid tumor is discussed.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Rates for intramolecular excimer formation of poly(α-methylstyrene) measured by using picosecond pulse radiolysis

Summary The rate constants for intramolecular excimer formation, k_DM, of poly(α-methylstyrene) with different molecular weight were determined by using picosecond pulse radiolysis. Values of k_DM for poly(α-methylstyrene) are a little smaller than those for polystyrene with nearly same molecular weight. It appears to be mainly due to steric hindrance by methyl substituent of main chain.